Bảng giá Moonar New Handheld RFID ID Card Copy Reader Writer 6 Writable Tags 6 Cards - intl Phong Vũ

Giới thiệu sản phẩm Moonar New Handheld RFID ID Card Copy Reader Writer 6 Writable Tags 6 Cards - intl

Handheld RFID ID Card Copier/ Reader/Writer 6 Writable Tags/6 Cards

                           

Specification:
Material: ABS
Color:as picture
Distance: ≤25mm (keyfob), ≤60mm (card)
Supported blank tag: T5557, EM4305.

Working frequency: 125Khz

Power: Two piece AAA battery, it can be use 20,000 times.(Batteries are not included)

Working status Led: Read, Power, Write

Button: Read Button, Write Button

Application: You can copy all of the ID card, such as access cards, cell cards, parking cards.

This device is used to clone 125Khz FRID card. It can copy and duplicate the 125 Khz EM4100 / EM410X card /tag ID for backup purpose.

Support 125Khz EM4100 / EM410X or compatible card /tag format only (HID standard NOT compatible!) so that you should reference the device module when you work. It's very easy to use.

How to clone:

Push power switch on the right of device, it will keep two or three times, and LED is on mean it works, if not restart please.

Put the other card near the antenna left of the device, and then press READ button, the device will keep and the LED is on when read successful, if beep 2 times go to step 3, if beep 3 times go to step 4, click READ again if it doesn't beep.

Change an new blank card as T5557/EM4305，then press WRITE button, when beep PASS LED is on mean clone successful, if it doesn't beep and light please write again.

Change a blank T5557, then press WRITE button, when beep PASS LED is on mean clone successful, if it doesn't beep and light please write again.

Repeat step 3 or step 4 if you want to make more same ID card.

Switch off for save power.

Package included:
1 x Handle RFID Writer

6 x Keychain can be copied

6 x Cards