Bảng giá DC-DC Boost Converter 8-60V to 12-83V Adjustable Step Up Power Supply Module - intl Phong Vũ

• Low resistance
• Current spike resistance circuit
• Upgraded fuse is not easily burnt
• High pressure resistance power tube
• the power tube won't emit too much heat
• Tin coating back allows more current through

Description:

100% Brand New High class quality

Low resistance, and the power tube won't emit too much heat

Tin coating back allows more current through

High pressure resistance power tube can prevent breakdown of power tube when it is at limit booster state

Current spike resistance circuit is redesigned, and booster module won't be burnt because of input current spike

Upgraded fuse is not easily burnt. Updated 30A wiring terminals

Specification：

Input voltage: 8-60V

Input Current: 20A

Quiescent current: 15mA (12V liter 20V, the output voltage, the higher the current will increase too quiet)

Output voltage: 12-80V continuously adjustable

Output Current: 20A MAX Over 15A, please enhance heat dissipation (input, output pressure related, the greater the pressure the smaller the output current)

Constant Range: 0.5-20A

Output Power:

Input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W,

Enter 36V * 20A = 720W, input 48V * 20A = 960W, input 60V * 20A = 1200W

If you need more power, you can use two modules in parallel, such as the output to 30A, two modules can be used in parallel, The current per module can be adjusted to 15A.

Working temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)

Operating frequency: 150KHz

Conversion efficiency: up to 95% (efficiency and input and output voltage, current, pressure related)

Overcurrent protection: Yes (with reduced flow adjustment, adjustable output current limit, current exceeds the current limit, the output current is automatically reduced to a minimum 5A, vary according to the nature of the load current will be.)

Short circuit protection: Yes (input 20A fuse) double short circuit protection, the use of more security.

Input reverse polarity protection: None, (if necessary, please enter the string into the diode)

Output Counter filling: Yes, for charging plus blocking diode is not required.

Installation: four 3mm screws

Connection: solderless terminals output

Module dimensions:116x52x15mm

Weight: 300 g

Specifications:

Low resistance, and the power tube won't emit too much heat

Tin coating back allows more current through

High pressure resistance power tube can prevent breakdown of power tube when it is at limit booster state

Current spike resistance circuit is redesigned, and booster module won't be burnt because of input current spike

Upgraded fuse is not easily burnt. Updated 30A wiring terminals

Package Included:

1 x1200W 20A DC Converter Boost Power Supply Module

Notes:

Due to the difference between different monitors, the pictures may not reflect the actual color of the item.

Compare the detail sizes with yours, please allow 1-3cm error, due to manual measurement.

Please leaving a message before you give the bad feedback, if the products have some problems.

Thanks for your understandings

Đặc tính sản phẩm